| Customization: | Available |
|---|---|
| Material: | Zirconia |
| Content: | Zro2: 94.8%, Y2o: 35.2% |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Yttria stabilized zirconia beads have a zirconia content of approximately 95%, they are commonly referred to as "95 zirconium" or "pure zirconia beads". It uses rare earth yttria oxide as a stabilizer and uses high whiteness and high fineness raw materials to ensure "zero-pollution" to grinded materials.
Yttria stabilized zirconia beads are mainly used in ultra-fine grinding and dispersion of materials requiring "zero pollution" and high viscosity and high hardness, such as non-metallic minerals, pesticides, electronic ceramics, magnetic materials, titanium dioxide, medical supplies, pigments, dyes, Ink, special chemical industry, etc.
Our yttria stabilized zirconia beads are comparable to the quality of similar world's advanced similar products, free samples are available for testing. We have large inventory for usual dimensions.
Spherical balls: Φ0.1-0.4, Φ0.4-0.6, Φ0.6-0.8, Φ0.8-1, Φ l, Φ2, Φ3, Φ5, Φ7, Φ10, Φ12, Φ15, Φ20, Φ55 mm.
Cylindrical balls: Φ3×3, Φ5×5, Φ7×7, Φ10 x10, Φ12 x12, Φ15 x15 mm.
Other shapes could be customized. We have a group of experienced technical personnel, advanced mould production equipments to realize your customization by drawing and sample. Fast delivery for customized dimension, shipment about 20 days.
1. High hardness & strength
a. The raw material is made of 3Y tetragonal crystal phase ultra-fine nano-purple zirconium powder;
b. Advanced rolling and titration molding technology
c. Unique sintering technology.
2. Low wear
a. Our raw materials are made of high-quality zirconium powder imported from Australia. The low impurity content makes the product more resistant to corrosion and wear.
b. The fineness of zirconium powder is also controlled by ultra-fine nano-scale. The density of the zirconium balls produced by this is much higher than that of the zirconium balls made of coarse powder.
3. High roundness
a. The use of advanced rolling and titration molding technology initially guarantees the roundness of the ball.
b. In the screening process, the screening technology with independent intellectual property rights is adopted, and the few shaped balls are eliminated, which completely ensures the high roundness of shipped products.
4. High quality consistency
a. We control the raw materials in the inspection process very strictly, and the parameters such as impurity content, fineness and specific surface area are required to be kept in a relatively constant range.
b. We use a fully automatic controlled natural gas tunnel. Compared with other furnace, this furnace increases the effect of hot air convection to ensure the uniform temperature difference of the furnace interface, and the temperature difference of the same section of the furnace does not exceed 3 degrees.
| Name | Yttria Stabilized Zirconia Ball |
| Material | Yttria stabilized zirconia |
| Features,Advantages | Wear resistant, corrosion resistant, heat resistant |
| Applications (Equipment) |
For Planetary Ball Mill, Lab Ball Mill, High Energy Ball Mill, Roller Jar Mill, Attritors, Sample Prep Mixer/Mill, Shaker Mill, Mixer Mill, Cryomill, bead mill, bottle mill, sand mill |
| Applications (Use for ) |
Hard, super hard, abrasive samples, such as hard alloy powder, diamond powder, and silicon carbide powder. |
Miller Carbide is an experienced manufacturer of tungsten carbide customized parts started from 2008. Our products cover carbide grinding jars & bowls & mortars, carbide grinding balls, carbide pegs, carbide static & dynamic rings, bead mill disks, carbide stirring rods, carbide static & dynamic jaws, carbide crusher plates, carbide grinding discs, carbide rotors, carbide roll rings, carbide guide rolls, carbide burrs, carbide sleeves & bushings, and other customized wear-resistant components for valve and pumps ect. With years of tungsten carbide engineering and manufacturing experience, we can concentrate our skills to the development of customized products for a wide spread of wear applications in milling & crushing industry.
Unlike other suppliers, Miller operates with three disciplines: Engineering, manufacturing and after sale service support. This means we are able to improve the efficiency of your machine and tools with customized products and direct access to the manufacturer. Miller Carbide works closely with its customers to ensure their requirements are designed efficiently and suitable for application. We can design the components needed from drawings or delivered samples.| Direct Sales Integrating R&D, production sales and technology |
Mold customization Rich molds OEM customization accepted |
Adequate equipment grinding/pressing sintering/deep processing |
Technical strength 15 years of experience in technical team, research & innovation |
){kind=link}